ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
MY 4WD WILL NOT ENGAGE ON MY 99 RANGER, I HAVE CHANGED OUT THE TRANSFER CASE MOTOR AND SWITCH I CHECKED THE FUSES. MY 4WD HI AND LOW INDICATING LIGHTS ON THE DASH BLINK ON AND OFF NOW AND THEN. I WOULD LIKE TO GET A FREE SCHEMATIC OF THE WIRING WITHOUT BUYING A $30.00 MANUAL. CAN ANYONE HELP.
On the 4wd switch there are 4 wires blk,gry/red,white/blu, blk wires are any of them suppose to be hot all the time it is like i am not getting power to the switch.
Keep in mind that there is a control module in the cab as well that could be malfunctioning. It has a self test feature and it's usually behind the plastic trim behind the driver's side seat. It has a self test button, so it's pretty easy to check.
My experiance with the GEM was when it came out and controlled the interior lighting and replaced a bunch of relays. I had a 1996 Ranger and the 4WD had a seperate module. The GEM can be tested using a code scanner and uses "B" codes instead of "P" codes.
If the GEM tests good, the only other thing left is a wiring problem.
email jim
reply to message
post new message
search forums
