 |
Looking at front of engine,first plug on you right side #1. #2frist plug on your left.#3 second plug back on your right.#4 second plug back on your left.and so forth. To find #1 on compression stroke remove #1 plug,ground the plug wire.with your thumb over #1 plug hole crank engine over till you feel pressure building in # 1 cyl.Your mark on the damper should be close to mark on the timing bracket.Now your rotor should be pointing to the #1 plug wire on the dist. cap. Your firing order should be cast in to the intake manifold.Take note the direction the rotor is turning. Start with # one and work your way around the cap.in the direction the rotor turns.Good Luck MIKE |
email mike e
reply to message
search forums
