 |
OK Joe now we kinda figured out how it works.Was the tag system flushed with new fluid.?Still could be a hose.If the tag cylinder does not return back far enough the return hole for the fluid stays blocked and fluid can't return to the tag master.You said the tag vacuum booster was replaced it could be the push rod may be to far out.Usually if you don't mess with the adjustment it comes out ok,but if the new booster is just a bit thinner it might push to far forward on the master cylinder.Or if the push rod was turned out a thread or two it will not wave enough clearance.Just a few more ideas, Good Luck Mike |
email mike e
reply to message
search forums
