 |
Yes a great idea,when you do it you can get new bleeder screws that have a check ball built into them.I think called Easy bleed or something like that.About 5 or 6 bucks each,just push on a short hose and bleed them easy.I got mine at Pep Boys but lots of stores have them.Just take one out and take it with you to get the right size thread. If the master cyl.was not removed it should't be the rod adjustment.A sticking caliper or a hose.When they start to drag before lock up feel the hubs and see if one is much hotter than the rest.Mine was front left.Don't know how hot you got them but if they were smoking better check grease in the hubs also,may have melted. Mike |
email mike e
reply to message
search forums
