ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
This is a '95 Bounder on a Chevy Chassis,w/454. Replaced the actuator switch and light stays on. Seems to be another source of power feeding the light. Where does this power come from? Pump runs and shuts off but the light stays on all the time,with the key on. Any help or schematic would be appreciated. Thanks!!
I have same problem and been trying to find a schematic on electrical and diagrams for the auto park brake plus emergency brake.
98 Fleetwood Bounder that is 32H model
Hello Gary;
replace the grey switch--it sits upright---be sure key off-and in park
so there is NO pressure
part # = 10218778-when you go to chevy dealer --take part---some have different part #
the (green) sits horizontal---and it's part #= 15961566
some 95 and down have a switch on the Cable, fwd. of the actuator,
Rich I did replace that switch. Going to replace the green one ( on the pump) tomorrow. Pump also runs about every 10 seconds. Had it all apart today looking for an internal leak. Replace a couple O-rings but didn't help. No external leaks and also eliminated the dump solenoid that releases the pressure when you go to park, that is not leaking. But my problem is the light right now. Its always on. Thanks
email Gary
reply to message
post new message
search forums
