 |
I have a 1995 GMC 2500 4x4 454 with a 4L80E. It had a bunch of mud built up around the transmission and transfer case, which I have tried cleaning off.
On the drivers side of the transmission, there are two wiring plugs. One is larger and has maybe 8 or 10 wires. The second one is a small plug (about 1/2" x 1/4") with two wires going into the back of it. That second plug is not connected - it's just hanging there beside the transmission. Since it's muddy, I don't think it has been connected for a while.
What is that plug for, and what does it do? Where does it connect to? Since things are dirty under there and the space is tight, I can't see much.
The transmission seems to work fine, although I can't remember if it has a passing gear. (I never use passing gear as I only use this truck to pull a '28 foot trailer and haven't driven it since pulling the trailer last summer.)
The vent tube was also plugged with mud, which I cleaned out. I wonder if that caused it to use a little oil?? It used a quart every few thousand miles.
Thanks for your help!! |
email Swampdog
reply to message
search forums
