ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
Have limited amount of new 8V71 and 8V92 rebuild kits. Each kit includes pistons, rings, rods,and sleeves. 8V71 kit $600.00, 8V92 kit $800.00 plus ship. Also have new 71' and 92" sleeves only (new) for $20.00 ea. either motor. New reman. injectors (brown tags 65's) $400.00 set of 8. Used injectors $10.00 ea. again plus ship. Have other motor parts and trans. parts also. Contact me at my email address,or call 503-364-9789 and ask for Al. Evenings is best to 10:00 P.M. PST. There is a very limited amount of some items.
Dear sir/madam,
My name is WILLAIMS JAMES,a NIGERIAN based Business man.I was opportuned to visit your website on which i found the favourite and quality goods my company deals with and i want to make some shopping on those goods i want your store.
At this moment i would rather say if your company wouldn't mind to render the help to my company in shipping the goods to NIGERIA.
I will be very grateful and do appreciate if this mail is favourably considered and reply could be sent to me through this medium,for making it faster.
Thanks.
What would cause the exhaust port fingers in the sleeves of an 8v71 to fracture? Rebuilt about 51,000 miles ago. This happened to most of the fingers on two sleeves and another sleeve had visible cracks on some fingers. Until this happened coach was running like a top but temp was higher than normal but not in danger zone. Would like to know possible causes as well as what other damage to look for. Also, due to percentage of sleeve failure I think sleeves in other cylinders should be suspect as well. Any experience with defective metal in sleeves?
I have a Bomag MPH 100 Reclaimer with a Detroit Diesel 8V71 engine in it. We are under the impression that the motor has a cracked head and we are definately getting collant contamination in our oil sample results.
I was wondering if you may have a source of re-built motors I may be able to contact to purchase one from.
Thank you, and I hope to hear from you soon.
Christopher A. Coelho
Shop Manager
Baltazar Contractors
83 Carmelina's Circle
Ludlow MA 01056
Hello,
Good day to the reader of this massage.
I'm Mrs.Alex Ana, I'm mailing you now onthe behalf of our company **Allas International Store**,to infrom you that we want to pruchase some of you product to my store here in west African, Co's i was infrom that doe's item's are needed by some of our customer's and for some of our current project plant.
We will be grad alot if you can e-mail us back and let know if you can sell to us and ship to us via DHL / UPS /fedEx service or air-cargo.
Also kindly advise back if you have and any of the following part instock for sell
1) MARK TRUCK
2) CUMMINS
3) PERKINS and
4) DETROIT
5) SETRIOT DIESEL
Hope this is okay with you? If so kindly get back to use on this e-mail address:
Mrs Alex ( a_alex34@yahoo.co.uk )
Mr Steve (asteve37@hotmail.com )
We look up to your reply regarding our requst.
Thanks God Bless you
Mrs.Alex
General Manager
Allas International Store
www.allas-int-store.itgo.com
this spear parts is required for yemen, please kindly quote for two engines requirments please.
thanks
ahmed hamam:
email: semos2010@yshoo.com
List of Spare Parts Requirement
Spare Parts for:-
Detroit Diesel 92 series / 8V 076764 / 8087300
S/# Parts Description
01 Piston
02 Liner
03 Main Bearing
04 Thrust Washer
05 Oil Seal for Main Bearing.
06 Timing Cover Oil Seal.
07 Connection Bush.
08 Ring Set.
09 "O" Ring for Liner.
10 Valve.
11 Guid.
12 Cylinder Head. (4 Piston).
13 Gasket Kit.
14 Gear for Oil Pump.
Above Spare Parts Required for Two Engines Use.
Kindly quote for two engines requirements.
WE WOULD LIKE TO INTRODUCE OURSELVES WITH THIS OPPORTUNITY THAT WE ARE ONE OF THE LEADING MANUFACTURERS SUPPLIERS & EXPORTERS OF CENTRIFUGAL CAST CYLINDER LINERS SINCE 1969.OUR CYLINDER LINERS ARE BEEN MANUFACTURED IN INDUCTION FURNACE WITH PLEATEAU HONED WHICH ARE BEEN INSPECTED THROUGH SPECTRO METER ALONG WITH SURFACE TESTER FOR HONING PARAMETERS
WE DO NOT COMPROMISE APPROACH IN CONSTANTLY UPGRADING OF QUALITY IN ACCORDANCE WITH CUSTOMERS' DESIRE. WE ARE SUPPLYING OUR MATERIALS TO MANY OEM CUSTOMERS IN INDIA. AND EXPORTING THE SAME IN VERIUS COUNTRIES
Product Range
Outer diameter 70mm to 500 mm
Inner Diameter 60mm to 400 mm
Length 100 mm to 1200 mm
Weight 2 kg to 250 kg
WE WOULD LIKE TO SUPPLY CYLINDER LINERS COMPONENT TO YOUR COMPANY. WE REQUEST YOU TO KINDLY SEND YOUR INQUIRY
YOU CAN GET BETTER QUALITY AT LAW COST THEN YOUR PRESENT PURCHASE
PLS GIVE US A CHANCE TO FULL FILL YOUR REQUIREMENTS
IF YOU NEED ANY FURTHER INFORMATION, PLEASE CONTACT US WITHOUT ANY HESITATION.
THANKING YOU,
BEST REGARDS,
[MANOJ PATEL]
BLUESTAR SPARES, Our USA sales office
“BLUESTAR BUILDING” Luis G. Batista C.P.M.
3- Bhaktinagar Station Plot, 12200 SW 91 Terr., Unit 702
Rajkot -360002 (INDIA) Miami, FL 3318612200 SW 91 Terr., Unit 702
Phone:+ 91 281 2462019 North America 800.614.8239Miami, FL 33186
Fax: +91 281 2461928 International 954.337.6700 North America 800.614.8239
Mobile +91 98242 11322 Fax: 888.348.9205
Email:- manoj@bluestarspares.in Website :- www.bluestarspares.in Email:- luis@lmtradingcorp.com
Could you please send us the catalogue for spares of DETROIT DIESEL ENGINE SERIES 149 used in our firm. Mfr. is DETROIT DIESEL CORP. I am not able to get the information in the site. It may be sent electronically please.