ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
IF I READ YOUR POSTING CORRECTLY, YOU ARE LOOKING FOR A SKYLIGHT THE OUTER PANEL IS 16.75" X 23.75" iD THIS IS THE CORRECT SIZE THE ORDER NUMBER FROM WINNEBAGO DEALER IS 080910-01-000. THIS IS FOR THE OUTER PANEL. THE WINNEBAGO INDUSTRIES R.V. PARTS& ACCESSORIES CATALOG SHOWS SEVERAL SKYLIGHTS. THEY ALLSO SHOW THE INNER PANEL AND EXTERIOR TRIM. IF YOU NEED THESE PART NUMBERS LET ME KNOW AND WILL E-MAIL THEM TO YOU. HAROLD
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
IF I READ YOUR POSTING CORRECTLY, YOU ARE LOOKING FOR A SKYLIGHT THE OUTER PANEL IS 16.75" X 23.75" iD THIS IS THE CORRECT SIZE THE ORDER NUMBER FROM WINNEBAGO DEALER IS 080910-01-000. THIS IS FOR THE OUTER PANEL. THE WINNEBAGO INDUSTRIES R.V. PARTS& ACCESSORIES CATALOG SHOWS SEVERAL SKYLIGHTS. THEY ALLSO SHOW THE INNER PANEL AND EXTERIOR TRIM. IF YOU NEED THESE PART NUMBERS LET ME KNOW AND WILL E-MAIL THEM TO YOU. HAROLD
Thanks for the info. I have ordered the plastic skylight as a separate item. The aluminum frame is OK except it has about 1" of what appears to be rubber roof sealer all around it. I guess it was put on by the previous owner to stop or prevent a leak. It is really sticky and difficult to remove from the frame and the roof top. Any tricks for getting this stuff off other than scrapping and pulling??
Appreciate any ideas.
Harold,
I just found this message and I am hoping you can help me. I need the same thing. A skylight too, the size is 33 1/2 x 19 1/2. That is the dome size. There is a 1 3/4 to 2 in flang around it and there are 22 bolts that hold it down. Can you please help?
I have the same problem only the skylight on mine is larger. Would you happen to know the part number for one that has outside dimensions of 22 3/4 X 25 and an inside dimension of 19 X 22.
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
IF I READ YOUR POSTING CORRECTLY, YOU ARE LOOKING FOR A SKYLIGHT THE OUTER PANEL IS 16.75" X 23.75" iD THIS IS THE CORRECT SIZE THE ORDER NUMBER FROM WINNEBAGO DEALER IS 080910-01-000. THIS IS FOR THE OUTER PANEL. THE WINNEBAGO INDUSTRIES R.V. PARTS& ACCESSORIES CATALOG SHOWS SEVERAL SKYLIGHTS. THEY ALLSO SHOW THE INNER PANEL AND EXTERIOR TRIM. IF YOU NEED THESE PART NUMBERS LET ME KNOW AND WILL E-MAIL THEM TO YOU. HAROLD
Thanks for the info. I have ordered the plastic skylight as a separate item. The aluminum frame is OK except it has about 1" of what appears to be rubber roof sealer all around it. I guess it was put on by the previous owner to stop or prevent a leak. It is really sticky and difficult to remove from the frame and the roof top. Any tricks for getting this stuff off other than scrapping and pulling??
Appreciate any ideas.
I USE PAINT REDUCER. IT SOFTENS AND DESOLVES THE TAR AND SEALENT. IF YOU USE THIS MAKE SURTAN THAT YOU USE IT OUT SIDE AS THE FUMES ARE QUITE STRONG. HAROLD
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
IF I READ YOUR POSTING CORRECTLY, YOU ARE LOOKING FOR A SKYLIGHT THE OUTER PANEL IS 16.75" X 23.75" iD THIS IS THE CORRECT SIZE THE ORDER NUMBER FROM WINNEBAGO DEALER IS 080910-01-000. THIS IS FOR THE OUTER PANEL. THE WINNEBAGO INDUSTRIES R.V. PARTS& ACCESSORIES CATALOG SHOWS SEVERAL SKYLIGHTS. THEY ALLSO SHOW THE INNER PANEL AND EXTERIOR TRIM. IF YOU NEED THESE PART NUMBERS LET ME KNOW AND WILL E-MAIL THEM TO YOU. HAROLD
Thanks for the info. I have ordered the plastic skylight as a separate item. The aluminum frame is OK except it has about 1" of what appears to be rubber roof sealer all around it. I guess it was put on by the previous owner to stop or prevent a leak. It is really sticky and difficult to remove from the frame and the roof top. Any tricks for getting this stuff off other than scrapping and pulling??
Appreciate any ideas.
I USE PAINT REDUCER. IT SOFTENS AND DESOLVES THE TAR AND SEALENT. IF YOU USE THIS MAKE SURTAN THAT YOU USE IT OUT SIDE AS THE FUMES ARE QUITE STRONG. HAROLD
Harold,
Thanks, I will give it a try this weekend.
By the way, where did you get a parts book that shows all these part numbers?
The skylite over my shower is cracked from years of UV exposure. It is a 17x 24 stationary skylite that simply screws to roof. The standard opening for fans and vents is 14x14.
Any ideas on where to find this size and type skylight?
IF I READ YOUR POSTING CORRECTLY, YOU ARE LOOKING FOR A SKYLIGHT THE OUTER PANEL IS 16.75" X 23.75" iD THIS IS THE CORRECT SIZE THE ORDER NUMBER FROM WINNEBAGO DEALER IS 080910-01-000. THIS IS FOR THE OUTER PANEL. THE WINNEBAGO INDUSTRIES R.V. PARTS& ACCESSORIES CATALOG SHOWS SEVERAL SKYLIGHTS. THEY ALLSO SHOW THE INNER PANEL AND EXTERIOR TRIM. IF YOU NEED THESE PART NUMBERS LET ME KNOW AND WILL E-MAIL THEM TO YOU. HAROLD
Thanks for the info. I have ordered the plastic skylight as a separate item. The aluminum frame is OK except it has about 1" of what appears to be rubber roof sealer all around it. I guess it was put on by the previous owner to stop or prevent a leak. It is really sticky and difficult to remove from the frame and the roof top. Any tricks for getting this stuff off other than scrapping and pulling??
Appreciate any ideas.
I USE PAINT REDUCER. IT SOFTENS AND DESOLVES THE TAR AND SEALENT. IF YOU USE THIS MAKE SURTAN THAT YOU USE IT OUT SIDE AS THE FUMES ARE QUITE STRONG. HAROLD
Harold,
Thanks, I will give it a try this weekend.
By the way, where did you get a parts book that shows all these part numbers?
THE CATALOG IS FROM MY WINNEBAGO DEALER. IT IS PUT OUT BY THE WINNEBAGO INDUSTRIES. IF YOOUR LOCAL DEALER WILL NOT GIVE YOU ONE CALL WINNEBAGO AT 1-800-537-1885. HAROLD
email Ray steele
reply to message
post new message
search forums
