ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
Before today at least I could use my dometic refrigerator on AC but now nothing. Here is what I have. My Refridgeator would work on ac but not gas. After trying everything the manual said to do I started doing some checking on the igniters voltage. I had 12 volts at the igniter and while undoing the wires accidently touched the + wire on the igniter with the - wire. Blew the 3 amp fuse but the 5 amp is ok. I replaced the 3 amp but now do not have any voltage at the igniter. I do have 120 volts at terminal 5 % 6 but none at terminal 7 & 8. Not sure where to go from here but any help would really be appriciated.
Thanks,
Dale
With 12 volts available at the 3 amp fuse and 120 volts available at the 5 amp fuse,and the fridge not cold (ie thermostat calls for cooling) and AC or AUTO mode selected, there should be 120 volts on 7 or 8 activating the heating element. If no 120 volts to the heating element terminal you have a defective board.
with GAS selected or no 120 volts available there should be 12 v at the plus term of the igniter and the igniter shuld spark if there is no flame or the electrode is not grounded by carbon, etc. No 12 v at igniter, bad board, if 12 v and No spark, bad igniter. I have rebuilt boards for $85. most models. let me know if I can help. William
email Dale
reply to message
post new message
search forums
